dmesg - 2014-03-16 12:20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.32-2-MANJARO (korrode@legion) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP Sun Mar 2 22:14:17 EST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008dacefff] usable
BIOS-e820: [mem 0x000000008dacf000-0x000000008f0cefff] reserved
BIOS-e820: [mem 0x000000008f0cf000-0x000000008f7cefff] ACPI NVS
BIOS-e820: [mem 0x000000008f7cf000-0x000000008f7fefff] ACPI data
BIOS-e820: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ProBook 455 G1/194E, BIOS 68CPE Ver. F.21 09/05/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-through
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFF0000000 write-back
2 base 0000FFC00000 mask FFFFFFC00000 write-protect
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b26000, 0x01b26fff] PGTABLE
BRK [0x01b27000, 0x01b27fff] PGTABLE
BRK [0x01b28000, 0x01b28fff] PGTABLE
init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[mem 0x43ee00000-0x43effffff] page 2M
BRK [0x01b29000, 0x01b29fff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43edfffff]
[mem 0x43c000000-0x43edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x8dacefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x8d9fffff] page 2M
[mem 0x8da00000-0x8dacefff] page 4k
init_memory_mapping: [mem 0x8f7ff000-0x8f7fffff]
[mem 0x8f7ff000-0x8f7fffff] page 4k
BRK [0x01b2a000, 0x01b2afff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x37a0c000-0x37cfdfff]
ACPI: RSDP 00000000000f2ef0 00024 (v02 HPQOEM)
ACPI: XSDT 000000008f7fe120 0006C (v01 HPQOEM SLIC-MPC 00000003 01000013)
ACPI: FACP 000000008f7fc000 0010C (v05 HPQOEM 194E 00000003 HP 00000001)
ACPI: DSDT 000000008f7d9000 1E803 (v01 HPQOEM 194E 00000001 INTL 20110112)
ACPI: FACS 000000008f084000 00040
ACPI: HPET 000000008f7fb000 00038 (v01 HPQOEM 194E 00000001 HP 00000001)
ACPI: APIC 000000008f7fa000 00084 (v01 HPQOEM 194E 00000001 HP 00000001)
ACPI: MCFG 000000008f7f9000 0003C (v01 HPQOEM 194E 00000001 HP 00000001)
ACPI: FPDT 000000008f7d6000 00044 (v01 HPQOEM 194E 00000001 HP 00000001)
ACPI: BGRT 000000008f7d5000 00038 (v00 HPQOEM 194E 00000001 HP 00000001)
ACPI: SSDT 000000008f7d4000 009F8 (v01 AMD PUMORI 00000001 AMD 00000001)
ACPI: SSDT 000000008f7d2000 01F6E (v02 AMD PUMORI 00000001 MSFT 04000000)
ACPI: SSDT 000000008f7d1000 00352 (v01 HP HPZPODDT 00000001 INTL 20110112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
NODE_DATA [mem 0x43eff9000-0x43effdfff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f200000-ffff88043e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x8dacefff]
node 0: [mem 0x8f7ff000-0x8f7fffff]
node 0: [mem 0x100000000-0x43effffff]
On node 0 totalpages: 3983981
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9004 pages used for memmap
DMA32 zone: 576208 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403776 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000008dacf000 - 000000008f0cf000
PM: Registered nosave memory: 000000008f0cf000 - 000000008f7cf000
PM: Registered nosave memory: 000000008f7cf000 - 000000008f7ff000
PM: Registered nosave memory: 000000008f800000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
e820: [mem 0x8f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s85504 r8192 d20992 u524288
pcpu-alloc: s85504 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3921708
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 84000000
PM: Registered nosave memory: 0000000084000000 - 0000000088000000
Memory: 15539204k/17809408k available (4874k kernel code, 1873484k absent, 396720k reserved, 4095k data, 1132k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
NR_IRQS:8448 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 63963136 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2495.432 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.86 BogoMIPS (lpj=24954320)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
tseg: 008f800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 19684 entries in 77 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
smpboot: Booting Node 0, Processors #1 #2 #3 OK
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19963.45 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x8f0cf000-0x8f7cefff] (7340032 bytes)
RTC time: 9:21:59, date: 03/16/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Deleted _OSI(Windows 2012)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [APPR] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfffdffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0x5000-0x50ff]
pci 0000:00:01.0: reg 18: [mem 0xd6000000-0xd603ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xd6044000-0xd6047fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1022:1417] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xd6048000-0xd6049fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xd604a000-0xd604bfff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0x5118-0x511f]
pci 0000:00:11.0: reg 14: [io 0x5124-0x5127]
pci 0000:00:11.0: reg 18: [io 0x5110-0x5117]
pci 0000:00:11.0: reg 1c: [io 0x5120-0x5123]
pci 0000:00:11.0: reg 20: [io 0x5100-0x510f]
pci 0000:00:11.0: reg 24: [mem 0xd6051000-0xd60517ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xd6050000-0xd6050fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xd604f000-0xd604f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xd604e000-0xd604efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xd604d000-0xd604d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xd6040000-0xd6043fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xd604c000-0xd604cfff]
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 18: [mem 0xd5000000-0xd5000fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:04.0: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:05.0: bridge window [mem 0xd4000000-0xd4ffffff]
pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xd3010000-0xd301ffff]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
pci 0000:03:00.1: reg 10: [mem 0xd3000000-0xd300ffff]
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot
pci 0000:00:07.0: PCI bridge to [bus 03-05]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xd3000000-0xd3ffffff]
pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfffdffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: Enabled 6 GPEs in block 00 to 1F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x8dacf000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0220-0x0227] has been reserved
system 00:04: [io 0x0260-0x0273] has been reserved
system 00:04: [io 0x0800] has been reserved
system 00:04: [io 0x0804] has been reserved
system 00:04: [io 0x087f] has been reserved
system 00:04: [io 0x0cdc-0x0cdf] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0200-0x027f] could not be reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN300b SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs HPQ6007 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:04.0: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:05.0: bridge window [mem 0xd4000000-0xd4ffffff]
pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-05]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xd3000000-0xd3ffffff]
pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfffdffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd5000000-0xd5ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd4ffffff]
pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd3000000-0xd3ffffff]
pci_bus 0000:03: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:06: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 13 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 14 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 15 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:06: resource 16 [mem 0x000ec000-0x000effff]
pci_bus 0000:06: resource 17 [mem 0x000f0000-0x000fffff]
pci_bus 0000:06: resource 18 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:06: resource 19 [mem 0xf0000000-0xfffdffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 3016k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x89acf000-0x8dacf000] (64MB) mapped at [ffff880089acf000-ffff88008dacefff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1394961719.940:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 30355
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c80000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
IPv6: Loaded, but administratively disabled, reboot required to enable
NET: Registered protocol family 17
Key type dns_resolver registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 6:957:373
vc vcsa1: hash matches
rtc_cmos 00:06: setting system clock to 2014-03-16 09:22:01 UTC (1394961721)
Freeing unused kernel memory: 1132k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1260k freed
Freeing unused kernel memory: 480k freed
systemd-udevd[56]: starting version 208
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
ACPI: bus type ATA registered
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: setting latency timer to 64
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xd604f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: setting latency timer to 64
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xd604d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:12.0: irq 18, io mem 0xd6050000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:13.0: irq 18, io mem 0xd604e000
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: setting latency timer to 64
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:14.5: irq 18, io mem 0xd604c000
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 53 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
ahci 0000:00:11.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051100 irq 53
ata2: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051180 irq 53
ata3: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051200 irq 53
ata4: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051280 irq 53
ata5: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051300 irq 53
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-5: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2495.343 MHz
Switching to clocksource tsc
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST93205620AS, SD28, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATAPI: hp DVD A DU8A5SH, NH62, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST93205620AS SD28 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVD A DU8A5SH NH62 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 7-1: new full-speed USB device number 2 using ohci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input1
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:12.0-1:1
input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:12.0-1:2
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:12.0-1:3
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Set hostname to .
systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit rc-local.service, ignoring: Unit rc-local.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[119]: Vacuuming done, freed 0 bytes
EXT4-fs (sda1): re-mounted. Opts: (null)
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x4a0 offMax=0x203a
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.8_OSE (interface 0x001a0007).
systemd-udevd[154]: starting version 208
vboxpci: IOMMU not found (not registered)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 14821 MBytes.
[fglrx] vendor: 1002 device: 990b count: 1
[fglrx] ioport: bar 1, base 0x5000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
ACPI: acpi_idle registered with cpuidle
ACPI: AC Adapter [AC] (on-line)
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
acpi device:01: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
hp_accel: laptop model unknown, using default axes configuration
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 55 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90001846000, a4:5d:36:cc:13:30, XID 0c000800 IRQ 55
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
lis3lv02d: 8 bits 3DC sensor found
ACPI: Battery Slot [BAT0] (battery present)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
cfg80211: Calling CRDA to update world regulatory domain
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (63 C)
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
systemd-udevd[174]: renamed network interface eth0 to enp1s0
media: Linux media interface: v0.10
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2654, fw id: 1323623
input: HP WMI hotkeys as /devices/virtual/input/input12
Linux video capture interface: v2.00
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8)
input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb5/5-5/5-5:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
systemd-udevd[176]: renamed network interface wlan0 to wlo1
acpi-cpufreq: overriding BIOS provided _PSD data
Adding 8393924k swap on /dev/sda6. Priority:-1 extents:1 across:8393924k FS
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (49 C)
hp_wmi: Unknown event_id - 0 - 0x0
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (51 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (23 C)
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[119]: Received request to flush runtime journal from PID 1
systemd-journald[119]: File /var/log/journal/dbd27b2ebcdb4cc8b90cc11966b2f302/system.journal corrupted or uncleanly shut down, renaming and replacing.
fglrx_pci 0000:00:01.0: irq 56 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1349
[fglrx] Firegl kernel thread PID: 1350
[fglrx] Firegl kernel thread PID: 1351
[fglrx] IRQ 56 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb78000, size:4000
[fglrx] Reserved FB block: Unshared offset:fb7c000, size:484000
[fglrx] Reserved FB block: Unshared offset:2ffee000, size:12000
r8169 0000:01:00.0 enp1s0: link down
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[fglrx] ATIF platform detected with notification ID: 0xd0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
wlo1: authenticate with f8:1a:67:5b:35:88
wlo1: direct probe to f8:1a:67:5b:35:88 (try 1/3)
wlo1: send auth to f8:1a:67:5b:35:88 (try 2/3)
wlo1: authenticated
wlo1: associate with f8:1a:67:5b:35:88 (try 1/3)
wlo1: RX AssocResp from f8:1a:67:5b:35:88 (capab=0x431 status=0 aid=1)
wlo1: associated
fuse init (API version 7.22)
xfdesktop[1531]: segfault at 0 ip 000000000041b631 sp 00007fffa876f1c0 error 4 in xfdesktop[400000+4a000]